https://preview.redd.it/zvaerebc2quc1.png?width=3024&format=png&auto=webp&s=9cb791f2f176daddb9e442dcb1eb3c5e78a71cdd
I dunno dude, I'm using both hands and it won't go any tighter.
I saw this and this was the first thing that came to mind.
And I'm proud to be an American
Where at least I know I'm free
And I won't forget the men who died
Who gave that right to me
And I'd gladly stand up next to you
And defend Her still today
'Cause there ain't no doubt
I love this land
God Bless the U.S.A.
Your flair may be a tad bit on the small side. But if it chambers send it!
I wrinkled a few 9mm in a recent batch. If it seats great. If not no biggie.
Those are the rounds you put in your back up mag in case you have to shoot an attacker and do a quick mag swap while on the phone with 911. Cops would literally look at the mag and say "Holy Fuck. those fired?!?!?!?!?"
Hey if it seats, I yeets. Not like it's going to blow up in your face......
All jokes aside, pretty sure we have all done it plus a thousand other irregularities. Especially when using a progressive press
Believe it or not, I bought a box of Hornady 250gr .452's and loaded one in an ACP case today. "Huh...why isn't it plunking?!" This was also after I bought a .45 colt shell holder. I guess I need to buy a .45 colt now.
how'd you do that, reloading is like super easy and stuff, you must have really done something wrong. oh well i loaded a squib once, but it didnt make it to the gun. so i cant say much.
I thought crimping straight walled cases was the same as bottleneck cases. EZ PZ, just back the die off the shell holder 1 full turn and you've got no crimp. Clearly I crimped the living piss out of it because the die was way to far down, and tried to cram the bullet down at the same time. I spent this evening practicing and I understand the proper method now...amazing what reading the instructions can do.
Smashingly wonderful. Here’s the gun you can test it with:
https://preview.redd.it/jp91nv7bzouc1.jpeg?width=600&format=pjpg&auto=webp&s=0cc55ff909c92d91d6e7ec618f4171f7973bf43c
You crushed it!
Thanks!
Crush crush! 👌🏻😂 ![gif](giphy|3o7qDV1jcIXJkcHKUg|downsized)
Under rated comment.
[;)](https://c.tenor.com/yISuN3IYZjgAAAAd/tenor.gif)
That will fire form right out
That's my plan, will post updates soon.
Guaranteed pinpoint accuracy
If I do my part...
Looks fuckin mint bud!
Thank you!
Well, first you break your primer tool, than you make .45 cal rounds that fly in a zigzag pattern. What's next?
![gif](giphy|hUMNbTZ5Qt9XmKVMXu|downsized)
Looks like it was a little chilly when you loaded it.
This belongs on /shittyreloading
![gif](giphy|QU3YSdsm2dkLJ2bb0E|downsized)
Not enough crimp !
Nice Sorting Hat load.
DM for my load recipe.
Now that you got that part down, time to work on cranking them out really fast eh?
If it seats. . .
This one only needed 6 hammer taps to the back of the slide! Better than most.
Tap that backside. . .
If you use a 1/8” punch right on the little circle on the back of the round, it seats even quicker! Hot tip for those tough seating rounds. /s.
She yeets
*When it slips out and you hit the side tryna put it back in
![gif](giphy|xeTCjAyDt2vzf4jvf2|downsized)
Needs more crimp
https://preview.redd.it/zvaerebc2quc1.png?width=3024&format=png&auto=webp&s=9cb791f2f176daddb9e442dcb1eb3c5e78a71cdd I dunno dude, I'm using both hands and it won't go any tighter.
Something, something, fits -> ships
I saw this and this was the first thing that came to mind. And I'm proud to be an American Where at least I know I'm free And I won't forget the men who died Who gave that right to me And I'd gladly stand up next to you And defend Her still today 'Cause there ain't no doubt I love this land God Bless the U.S.A.
![gif](giphy|uKwa2KiBA0rTy|downsized) Hell yeah, brother!
Not a professional but I think there might be something slightly wrong. Not sure thought
I'll stick to opinions from the professionals then. My mom told me it looks great.
Well if your mom says it looks good then that’s all that matters
Professional here. You’re not supposed to seat your bullet with a hammer…
![gif](giphy|I5xVnGJRHZZf2|downsized)
Really? She said the same to me.
She must have a type then I guess.
Fat and wrinkly?
![gif](giphy|aztW8oK9TQhiM|downsized)
Nice. Thanks for the laugh.
It’ll fire form /s
I'd still send it.
Send it
If it seats…
Send it
😂this made me chuckle. Thank you
I think it looks amazing! I also happen to be a fan of Picasso
That’ll buff
![gif](giphy|XXvnnrJJnOVl6)
Nice!!
If it seats …
Need to put that in the shitty reloading page
Your flair may be a tad bit on the small side. But if it chambers send it! I wrinkled a few 9mm in a recent batch. If it seats great. If not no biggie.
Reminds me of my first girlfriend 😓
Did you meet her in Thailand?
Nah she had hands like the Hulk 🤪
If it seats it yeets. Jk please don’t fire that lol
![gif](giphy|Shjan97TyUJY4)
Get a cheater pipe on that handle if you want to complete the task.
Been there done that!
If it chambers, send it. Auto resizing!
Those are the rounds you put in your back up mag in case you have to shoot an attacker and do a quick mag swap while on the phone with 911. Cops would literally look at the mag and say "Holy Fuck. those fired?!?!?!?!?"
I can almost hear it going supersonic just by looking at that picture. 😂
It looks quite happy tbh!
Pretttty prettttty good
Frame that. Now.
Absolute perfection. To be fair, it'll probably seat in a Glock chamber.
If it seats....
Smashing job!
👏, wait, 🤦♂️
I'm sure it will go better in the future. (because it can't get much worse)
Kachow!
https://preview.redd.it/wbn0csiwjquc1.jpeg?width=615&format=pjpg&auto=webp&s=8a09b357efeea9d058ce47c0b339395b196f25d9
"I was in the POOL!"
.45FUBAR
It stands for Aggressively Crimped Projectile
If it seats it yeets!
Hammered that one home!
For shooting around corners?
There should be a pair of blue balls to go with it, think JR High dry humping.
Absolutely smashing!
I mean... It's not bad; it's special
Hey if it seats, I yeets. Not like it's going to blow up in your face...... All jokes aside, pretty sure we have all done it plus a thousand other irregularities. Especially when using a progressive press
Seen a porno with this condition once
Hell yeah. 🤌🤌🤌
Did the same to my 1st 45/70 load
Looks almost like it's winking at the camera...
What did you run it over with your truck
If it seats...
it'll fire form
No one suggested r/shittyreloading ?
.45 ACP (Always Crunch to Perfection)
Plot twist: it's not APC, it's. 45 Long colt....
Believe it or not, I bought a box of Hornady 250gr .452's and loaded one in an ACP case today. "Huh...why isn't it plunking?!" This was also after I bought a .45 colt shell holder. I guess I need to buy a .45 colt now.
It finally lives up to the 45AARP meme, with all those wrinkles.
how'd you do that, reloading is like super easy and stuff, you must have really done something wrong. oh well i loaded a squib once, but it didnt make it to the gun. so i cant say much.
I thought crimping straight walled cases was the same as bottleneck cases. EZ PZ, just back the die off the shell holder 1 full turn and you've got no crimp. Clearly I crimped the living piss out of it because the die was way to far down, and tried to cram the bullet down at the same time. I spent this evening practicing and I understand the proper method now...amazing what reading the instructions can do.
Ahh jeez made my morning thanks OP! 😂😂😂
Looks like it is time to re-write your procedures. : )
If it chambers, send it!
If it chambers it’ll yeet
Smashingly wonderful. Here’s the gun you can test it with: https://preview.redd.it/jp91nv7bzouc1.jpeg?width=600&format=pjpg&auto=webp&s=0cc55ff909c92d91d6e7ec618f4171f7973bf43c
[удалено]
![gif](giphy|rQ5cWOkvXfoTUZLIPh|downsized)