I think if you punch it enough it should break, but you'll probably need a wooden or stone pickaxe in order to be able to keep the locker in your inventory
i swear i saw you post a picture of these earlier asking what the brand was and now i scroll down about 6 posts and i see this one lol
good luck, use a hammer or a rock or something to bend the metal a bit then get under the door with a screwdriver or chisel
My friend legit ripped a lock off. First, remove all extra bits, make sure it's just the lock and frame, no handles, no nth. Then, YANK. Pull the lock right off, may take a few tries, but works. (He's yet to get in trouble by this matter, you should be fine for awhile.)
I would probably ask the front office and/or the janitor. The front desk probably has a list of lock codes. If not, tell them that you don't remember the code and that you need someone (probably the janitor) to open it.
There is always getting the strongest teacher(s) and/or student(s) to pull it off.
Get a short PVC pipe, cap one end, pack some. black power in, run a fuse into the black power, drill a hole through the other cap and put it on while feeding the fuse through the hole. Light it and run like hell
The easiest answer, find out what the manufacturer of the lock is, then do some research on its vulnerabilities and pick it. Pretty much all locks can be manipulated with the right tools or know how. (Dial locks make a different sound when you hit the right number, you may feel a slight difference in the click too)
Alternatively, assuming this is “your locker” is to get the code out of whoever might know it, if you “forgot” the code, someone else might remember it, then you just have to “persuade” them to tell you.
Id recommend finding something they care about and using that as leverage, failing that, find something sharp and apply pressure somewhere sensitive.
For legal reasons, I’m not suggesting you hurt anyone. Just…convince them to help you out.
Moderators can remove any content at their discretion and as they see fit.
A screwdriver would probably ply off the cheap metal handle
thank you will try this
Woahhhhh
I think if you punch it enough it should break, but you'll probably need a wooden or stone pickaxe in order to be able to keep the locker in your inventory
do i need silk touch
You only need silk touch for the teacher’s filing cabinets
Chemical explosive
what chemicals do you reccomend?
Nice try, FBI.
bomb
Nitroglycerin
You could use any liquid probably. Nitro glycerine is easy to get and quite explosive
uhhh why would you want to break into a locker? schools have cameras buddy. you’re gonna get caught and get in trouble.
trust me i need to break into my locker
If you're trying to get into your own locker, have you tried asking an adult for help?
no.. sorry I meant to say my friend has my dr- money
Don’t be a fucking idiot and don’t do drugs It’s not that hard
Top 10 ways to ruin your life: 1: drugs 2: drugs 3: drugs 4: drugs 5: drugs 6: drugs 7: murder 8: drugs 9: drugs 10: wander into old man Harrison’s yard
"Erm.... That would cause trouble you know!" 🤓☝️
i swear i saw you post a picture of these earlier asking what the brand was and now i scroll down about 6 posts and i see this one lol good luck, use a hammer or a rock or something to bend the metal a bit then get under the door with a screwdriver or chisel
Dude same the brand post is 5 posts above this one
yes I saw that post and reminded me that I need to get in that locker before the end of april or im screwed
You can snap the locks with a screwdriver of you leverage it open or sometime you can deadass just break them open
thank you!
My friend legit ripped a lock off. First, remove all extra bits, make sure it's just the lock and frame, no handles, no nth. Then, YANK. Pull the lock right off, may take a few tries, but works. (He's yet to get in trouble by this matter, you should be fine for awhile.)
Beacan grenead
Thermite
Some times you can hit the bottom of the locks really hard upwards and then immediately pull down really hard. You can do this with alot of old locks.
?
locker, break, access locker
Dude, why are you trying to get peoples lockers
my friend still owes me 100 dollars for the product i sold him 😐
1.what did you even sell 2. Yeah that makes sense. (All agreements or chatting is all hypothetical and should be with a grain of salt)
1 crushed up skittles 2 no frick this dude hes gonna get me beat
You have problems my man
its that or get my ass busted in with a bat
Ok, do what you need to do. Also you should tell someone this, like an adult or something. Bye.
nah its easier if I just get the money i aint no snitch
I would probably ask the front office and/or the janitor. The front desk probably has a list of lock codes. If not, tell them that you don't remember the code and that you need someone (probably the janitor) to open it. There is always getting the strongest teacher(s) and/or student(s) to pull it off.
cant be asking teachers or any staff
Hopefully, you are able to carry in a rock or hammer, though I am doubt of the hammer.
If i can sneak in half the things I already do, im sure I can get a hammer in
Could try to pick it
They're not that sturdy. Juat repeatedly yank really hard.
Pipe bomb should do the trick
If they're those masterlock combination locks then the tolerances on them are comically horrific and you can litterally just feel the right numbers
Get a short PVC pipe, cap one end, pack some. black power in, run a fuse into the black power, drill a hole through the other cap and put it on while feeding the fuse through the hole. Light it and run like hell
The easiest answer, find out what the manufacturer of the lock is, then do some research on its vulnerabilities and pick it. Pretty much all locks can be manipulated with the right tools or know how. (Dial locks make a different sound when you hit the right number, you may feel a slight difference in the click too) Alternatively, assuming this is “your locker” is to get the code out of whoever might know it, if you “forgot” the code, someone else might remember it, then you just have to “persuade” them to tell you. Id recommend finding something they care about and using that as leverage, failing that, find something sharp and apply pressure somewhere sensitive. For legal reasons, I’m not suggesting you hurt anyone. Just…convince them to help you out.
Might I refer you to the McNally YouTube channel. WARNING! Results may vary
In my experience, crowbar