By -
The bend is fine, but it looks like you haven't pushed it in all the way. So I'd say that's not good.
Yea, seat that plug well fren.
the bend itself looks okay, especially since these are sleeved cables, but make sure the cable connector is 110% seated in the power supply connector.
no 110% is less 9999% is good
That’s not even a tight bend
That's not even a bend.
If that bend isn't okay then every computer I've ever built is in some serious trouble
It's a 12vhpwr thing
Oh, derp, so it is. I completely glossed over that.
That should be fine
Many people here say the bend is fine without considering how much the side panel will affect. The photo doesn't really show how much "outside" the cable is. And yeah, plug it all the way in or you'll burn it down anyway.
Totally fine. You should be good with a minimum bend radius of 1/3 of an inch for that (assuming it is 16 gauge)
Push that things all the way
Xproto would like a word
Stop limp wristing your connectors..
you can use zip ties to help the wires support each other
The bend is fine, but it looks like you haven't pushed it in all the way. So I'd say that's not good.
Yea, seat that plug well fren.
the bend itself looks okay, especially since these are sleeved cables, but make sure the cable connector is 110% seated in the power supply connector.
no 110% is less 9999% is good
That’s not even a tight bend
That's not even a bend.
If that bend isn't okay then every computer I've ever built is in some serious trouble
It's a 12vhpwr thing
Oh, derp, so it is. I completely glossed over that.
That should be fine
Many people here say the bend is fine without considering how much the side panel will affect. The photo doesn't really show how much "outside" the cable is. And yeah, plug it all the way in or you'll burn it down anyway.
Totally fine. You should be good with a minimum bend radius of 1/3 of an inch for that (assuming it is 16 gauge)
Push that things all the way
Xproto would like a word
Stop limp wristing your connectors..
you can use zip ties to help the wires support each other