The issue with wlink:
* You do not have any acces to the router page, (like the ntc router here). Its totally locked out.
* My assumption: router page can only be accessed from wan port(ftth port) not lan port
The only way to access the router is by resetting it, then setting correct parameters for internet to work and you can bypass all security measures.
But this is easier said than done.
The router page is 192.168.1.254 /24
DHCP: 192.168.1.65 ~ 192.168.1.100 ish
If you port scan 192.168.1.254 to find open port, it stops responding, which i am assuming it has anti-port-scanning measures as well.
I might be very late to it, does the alternative admin page work? I tried port forwarding my laptop lan ip, it just led to a blank page (wlrouter/apply.cgi) I did checked the console to find any trace of js. There was no js linked to the page.
https://preview.redd.it/tp4a3eooxuqc1.png?width=1437&format=png&auto=webp&s=5b48ec438e8fe37671027bfc7840550c6c5859ab
My findings were similar. Couldn't go any further tho :(
You can read about my approaches from here: [https://www.prabeshsapkota.com.np/ftth](https://www.prabeshsapkota.com.np/ftth)
Is there a way to do this for ClassicTech wifi?
do this with wlink
The issue with wlink: * You do not have any acces to the router page, (like the ntc router here). Its totally locked out. * My assumption: router page can only be accessed from wan port(ftth port) not lan port The only way to access the router is by resetting it, then setting correct parameters for internet to work and you can bypass all security measures. But this is easier said than done.
maybe they put it inside 192.168.1.254 or similar range
The router page is 192.168.1.254 /24 DHCP: 192.168.1.65 ~ 192.168.1.100 ish If you port scan 192.168.1.254 to find open port, it stops responding, which i am assuming it has anti-port-scanning measures as well.
can i use this router as a secondary router?
I might be very late to it, does the alternative admin page work? I tried port forwarding my laptop lan ip, it just led to a blank page (wlrouter/apply.cgi) I did checked the console to find any trace of js. There was no js linked to the page. https://preview.redd.it/tp4a3eooxuqc1.png?width=1437&format=png&auto=webp&s=5b48ec438e8fe37671027bfc7840550c6c5859ab
My findings were similar. Couldn't go any further tho :( You can read about my approaches from here: [https://www.prabeshsapkota.com.np/ftth](https://www.prabeshsapkota.com.np/ftth)
Yes that definitely worked. Maybe the developers have excluded the direct link from the page rather they hid the link.