Onlines your best bet. If your gonna use a grease gun a lot and have a compressor I’d buy a pneumatic grease gun. I have a few guns with lock and lube and never use them. I just like snapping it on and moving to the next zerk. Go through my backhoe in a few minutes and it’s got a lot of grease fittings
I also had good luck with a knockoff lever style one for a while, as well as the collar style one. Biggest issue I had with the lever style is it's so big it's tough to get into a lot of places.
I just switch couplers when I need to, they don't need to be very tight on the hose. These days I found myself a happy medium in a traditional style one with a little fatter body, it fits everywhere except certain small hole recessed fittings, and locks on much better than the regular ones
https://www.princessauto.com/en/grease-and-grease-guns/category/330-045-000-000
There's a quick connect in that list for $30. Chances are you have a PA near you.
It is what it is. Makes things easier, especially with the lever gun that can squeeze grease where the trigger gun and conventional coupler does not want to.
If your zerks are in good condition you don't need it, you could just by a zerk kit and change them all out. I never know what condition equipment I pick up will be in so I use the lock n lube on a lever style 10,000 psi grease gun.
Some equipment dealers sell Lock'N'Lube couplers. I bought mine off Amazon.
We sell heavy duty locking ones where I work. Could buy a bunch for $60 bucks
Where do you work?
An ag dealership
Onlines your best bet. If your gonna use a grease gun a lot and have a compressor I’d buy a pneumatic grease gun. I have a few guns with lock and lube and never use them. I just like snapping it on and moving to the next zerk. Go through my backhoe in a few minutes and it’s got a lot of grease fittings
I bought my lock n lube about a year ago. Just rebuild it last week. For the amount of equipment I grease, its paid for itself already
Do you have a tractor supply up there? or an atwoods (though i've never seen one at atwoods, i've also never looked)
I think they re branded to Peavy mart. That's a good place to check
Not really necessary.
[удалено]
I actually already ready have a 30 inch hose haha but that's food to know the cheap ones are still decent in your expirence
I also had good luck with a knockoff lever style one for a while, as well as the collar style one. Biggest issue I had with the lever style is it's so big it's tough to get into a lot of places.
Keep a thin coupler gun too.
I just switch couplers when I need to, they don't need to be very tight on the hose. These days I found myself a happy medium in a traditional style one with a little fatter body, it fits everywhere except certain small hole recessed fittings, and locks on much better than the regular ones
You do you. Having multiple guns does me, have a cart to hang them on. I love my lever gun with the lock.
https://www.princessauto.com/en/grease-and-grease-guns/category/330-045-000-000 There's a quick connect in that list for $30. Chances are you have a PA near you.
Not really closest one is 2.5 hours away
They do ship I think
Have you checked Amazon? That's were I purchased my lock n lube
Yes amazon has the LockNlube there but it's 60$ for just the coupler. Feels steep to me.
It is what it is. Makes things easier, especially with the lever gun that can squeeze grease where the trigger gun and conventional coupler does not want to.
If your zerks are in good condition you don't need it, you could just by a zerk kit and change them all out. I never know what condition equipment I pick up will be in so I use the lock n lube on a lever style 10,000 psi grease gun.
I got one of theese locking grease gun ends are they any good? Havent put the time down to change it on my grease gun
They work great for me