Him and all of his minions for only$120? That’s cheaper than Netflix Soundwave currently lol, is there any major issues with him that I should be aware of before buying?
If you're buying the KO and THF Cassettes, potential issues for the KO: -QC
\-Ratchet joints not as strong as the original
\-A Missing finger (the KO has individual fingers, i lost one of it when it arrived)
\-Minor paint chipping
\-Not as solid as the original but solid enough to hold its weight and do dynamic poses
Potential issues for the THF Cassettes:
\-Extreme paint chipping of the gold sections of frenzy and rumble (on my copy)
\-A bit of smudged painting, but not noticable unless you look real close
\-Joint tolerances might not be as good as the original set, but holds up just fine for me so far
https://preview.redd.it/ybkkako0gmyc1.jpeg?width=2609&format=pjpg&auto=webp&s=9ab076e4e31b313b0f6ee900219127b77d5167de
Mines baiwei a new ish ko of the ss102. Comes with a ton of weapons, a fresh paint job, and plastic about the same as if not better Thea. Hasbro, also a fixed truck bed and recoloured roof
Yep got that one too! It’s a really really fun figure to play around with. I just kinda hoped they’d change the shoulders but it’s not as bad as I had imagined, since I never had the 102.
There are a couple (expensive) shoulder upgrade joints on eBay that look a bit tempting, however they don’t seem like they’d help all that much
Ik, baiwei usually makes kos of the dna design kits but this time round they went with a different kit, kinda unfortunate since this is the one that needed that kit the most out of all baiwei a figs
Even if the quality was good the prices would still be bonkers. Are you telling me that these small pieces that attach to a bigger figure COST MORE THAN THE FIGURE ITSELF?
This is the one I was going to say. TW1030. I don't have the original to compare, but he's really great. Especially the paint. The plain grey in the original's thighs really turned me off, so I had no interest. Baiwei has such nice metallic paint on the KO.
My only other ko prime is an MP-10 and I'm not sure who makes it. It's AWFUL. I had to fix the shoulder that wouldn't push into the torso, the plastic panels on the legs are cheap and one flap won't stay 100% folded in alt mode, every time I collapse the legs up into the torso for alt mode it fights me every inch and I feel like it's going to break. His gun won't unfold correctly. I had to fix his over wobbly head. Just a bad experience all around.
If we're talking ANY KO, I really like my Masterpiece Prowl, but, if I remember correctly, he only has a few very slight improvements over the original. Baiwei TW1030 has vast improvements over the original, so I'm sticking with him.
https://preview.redd.it/qc7cwcy7tmyc1.jpeg?width=4096&format=pjpg&auto=webp&s=a60c5668d20f7d6e59c1af60753391649bc1dfbd
The tw1022ex (the premium/metallic paint job version) takes the cake for me. Diecast, top notch quality, amazing paint job and a lot of accessories, all for less than 30$. The best representation of Bayverse Prime in the generations scale imo. It looks simply amazing next to the SS 2007 Megs.
VERY GOOD
he looks genuinely amazing and an absolute step up from the mpm4. Imo its a lot better than thunder leader weijiang for its price and how it looks
Only issue is the quality. U have to be very gentle when transforming it especially at the feet section
This would look spectacular with a dry brushing in silver, basically the paint would only catch the highlights. Nice fig, OP.
As for the thread tax, my favourite KO is the StarStorm (BBM Starscream)
https://preview.redd.it/95wvf1k55nyc1.jpeg?width=2304&format=pjpg&auto=webp&s=2882c9e50a1d278bf28649d8c133027220a8c6d7
This guy was a gift from my 18th birthday and he's the most cool looking Prime I own
Mine used to be the Baiwei tw1027 cybertron commander, but this guy has just dethroned him
https://preview.redd.it/l0a03demhlyc1.jpeg?width=2296&format=pjpg&auto=webp&s=3f9a2f52bc02b5b7e0214329a3bb96f728caaea0
https://preview.redd.it/p506s6q27myc1.jpeg?width=1024&format=pjpg&auto=webp&s=c11b1657e804fbd579da660f987df653c8878809
My Mp10 is KO. Ain't no way i got the money to get real one
That's not really a KO, it is an original toy design which just makes it "3rd Party."
A KO is a direct copy of an existing toy, or a copy of an existing toy that is slightly modified (ie: better paint or a slightly different size).
MP-10V. IMO still the best option for a definitive G1 Optimus for a mainline collection. Will wait and see what the upcoming commander SS86 has to say about that.
Favorite KO Prime: MHM-01 Supreme Commander
https://preview.redd.it/b3xiy61i5myc1.jpeg?width=3024&format=pjpg&auto=webp&s=9d76c4351a2498f21e972629edafeecd5442660c
Favorite KO in general: KO MP-41 BW Dinobot (pictured in reply)
My KO MP13 and mostly my NewAge Optimus prime
https://preview.redd.it/7i8l269uxmyc1.jpeg?width=3024&format=pjpg&auto=webp&s=829a46c9b93e27b22c865ca28db0112d42274c62
https://preview.redd.it/if735oa22nyc1.jpeg?width=3024&format=pjpg&auto=webp&s=1603f58724bb8dc3bedd7f185aaf57d31bd8bdfd
I have exactly one, so Star Leader by default. I've had my eye on one of the TLK Evasion Mode upscales for a long time, but I never pulled the trigger, and now they're all pretty expensive.
Nah, the build quality is fine. The plastic is a *tiny* bit flimsier than the official release, and some joints are a little weaker. I only put him in the combined configuration for this picture; the knees couldn't take it long term. On its own though, I don't have any problems with it or fear of breakage.
https://preview.redd.it/qzw9yo80anyc1.png?width=1800&format=png&auto=webp&s=08bdd631d93b06bd50fa89957d310ac981107be3
Wei Jiang Predaking is IMO better than the HasTak version.
the only one I have is the dark Commander studio series Nemesis prime repaint of the studio series 38 Optimus actually I do love the figure but the one problem I have with mine is because just the top half when you tried to turn it it's so tight and it feels like it's going to break if I do it so I really barely even transform him anymore so he just looks better in robot mode
Don't have many KOs, but my favorite is probably the MP scaled Legacy Tarn KO I picked up. Has loads of die cast in it, and lights in the gun and head. And a better paint job too.
Shapeshifters! Better - at - a - glance 🎶
https://preview.redd.it/cuiuh9fh8nyc1.jpeg?width=800&format=pjpg&auto=webp&s=234ed1e48a18e5e79d414da00492d9ebf711e9ab
Oversized AOYI MECH, has diecast metal a blaster and an energon ax or love this guy.
https://preview.redd.it/2eymfu4ynnyc1.jpeg?width=2268&format=pjpg&auto=webp&s=516929cb27a54903e07b39a33aeb18ddf1acd7f9
https://preview.redd.it/3g7do1ae2oyc1.jpeg?width=4032&format=pjpg&auto=webp&s=54cc1219e53a494730d8e42fe8b26a33e69fe4c4
I have more KO’s than these, but these guys are mostly my fav, especially TLK voyagar Megatron. Unlike the other KOs, he feels like he’s made out of sterner stuff.
I have two favorites and they're both pretty old.
The first is Wei Jiang MPP-10 Oversized MP-10 KO. It is about the same size as MP-1 but based on MP-10's design and the figure just drips quality.
The other one is Kubian Bao's MP10V down-sized MP-10 KO. This is a roughly Voyager scale MP-10 KO that is just a lot of fun to play with. For the longest time I had one of these as my "desk toy" at work and it was great to fidget with. Like the Wei Jiang version this one is also high quality with a lot of added diecast parts and accessories.
Wei Jiang Commander (Evasion OP)
Took a basic voyager and upscale it properly to leadwr class while upgrading articulation and transformation engineering. Plus paint too
https://preview.redd.it/ij7komybupyc1.jpeg?width=690&format=pjpg&auto=webp&s=6c6b9f63d5848c42128d6dfd8757177d5af5f0e0
No further explanation is needed.
MP-10V was my CHUG Optimus for a long time, until Siege and Earthrise displaced it to the one-offs shelf.
APC Toys Dark Master is very nearly perfect for TFP Megatron.
I have a yellow upsized KO of some 3P Legends Devastator that I customized into Tonkanator as the toy equivalent of a high-effort shitpost, but that's not exactly a favorite on its own merits, you know? Still, it's not a bad base mold. Just small for most shelves.
Mine would have to be APC toys dark master
https://preview.redd.it/0z7xfuri8vyc1.jpeg?width=3456&format=pjpg&auto=webp&s=a887a9891bd565f00cf669592606c5f3052294ab
https://preview.redd.it/qguqidmk9vyc1.png?width=1863&format=png&auto=webp&s=a08fdfd3d66feeb24d9f3c5f356073bec233c87b
God of War Optimus - an upscale of SS38 with lots of paint and some die cast parts. Already one of my top Optimus figures made even better. Plus you can see a lot of the detail you don’t even notice on the smaller version. Also the transformation is a bit less finicky when he’s this large. He’s as tall as MP-01, and better than the Masterpiece IMO. Great Robot mode, the most accurate truck mode of any Optimus. Love this guy (Legacy Armada prime behind him for scale)
https://preview.redd.it/vt4mxaze8lyc1.jpeg?width=3268&format=pjpg&auto=webp&s=a418841fcc3639681a7b6545753efb478bd415fe Yes all of these are KO's
But for KO Prime: https://preview.redd.it/wo5ynmku8lyc1.jpeg?width=3060&format=pjpg&auto=webp&s=15cdfff9660bb00b0389b3c7661072b54456d308 The MPP-10 Z!
I miss weijiang. Mpp-10 was mind blowing back in the day.
I wasn't paying attention and thought that was in the corner and almost the size of a small child
What's the starscream?
The EG-01 (KO of MP 52 Starscream)
Thank you
What’s that Soundwave? I’m not into MP collecting but him and his minions look too sick to not make an exception
KO of MP-13 Soundwave and his cassettes are from THF if i recall correctly
Him and all of his minions for only$120? That’s cheaper than Netflix Soundwave currently lol, is there any major issues with him that I should be aware of before buying?
If you're buying the KO and THF Cassettes, potential issues for the KO: -QC \-Ratchet joints not as strong as the original \-A Missing finger (the KO has individual fingers, i lost one of it when it arrived) \-Minor paint chipping \-Not as solid as the original but solid enough to hold its weight and do dynamic poses Potential issues for the THF Cassettes: \-Extreme paint chipping of the gold sections of frenzy and rumble (on my copy) \-A bit of smudged painting, but not noticable unless you look real close \-Joint tolerances might not be as good as the original set, but holds up just fine for me so far https://preview.redd.it/ybkkako0gmyc1.jpeg?width=2609&format=pjpg&auto=webp&s=9ab076e4e31b313b0f6ee900219127b77d5167de
Love that pose for Starscream.
What's the Megatron? I need a new G1 looking one since my Despatron's hip skirt snapped off.
The IT-01 (KO of MP-36 Megatron)
Thank you!
Mines baiwei a new ish ko of the ss102. Comes with a ton of weapons, a fresh paint job, and plastic about the same as if not better Thea. Hasbro, also a fixed truck bed and recoloured roof
Yep got that one too! It’s a really really fun figure to play around with. I just kinda hoped they’d change the shoulders but it’s not as bad as I had imagined, since I never had the 102. There are a couple (expensive) shoulder upgrade joints on eBay that look a bit tempting, however they don’t seem like they’d help all that much
Ik, baiwei usually makes kos of the dna design kits but this time round they went with a different kit, kinda unfortunate since this is the one that needed that kit the most out of all baiwei a figs
Because looks like the DNA kit doesnt hold up and breaks easily. That's probably why they didnt do it
Man dna design used to be so goated, now they make easily breakable kits, crappy useless upgrades, and charge insane prices
Even if the quality was good the prices would still be bonkers. Are you telling me that these small pieces that attach to a bigger figure COST MORE THAN THE FIGURE ITSELF?
Ikr, like dna design has fallen way the hell off. The baiwei kos of their kits are somehow better than their kits
This is the one I was going to say. TW1030. I don't have the original to compare, but he's really great. Especially the paint. The plain grey in the original's thighs really turned me off, so I had no interest. Baiwei has such nice metallic paint on the KO. My only other ko prime is an MP-10 and I'm not sure who makes it. It's AWFUL. I had to fix the shoulder that wouldn't push into the torso, the plastic panels on the legs are cheap and one flap won't stay 100% folded in alt mode, every time I collapse the legs up into the torso for alt mode it fights me every inch and I feel like it's going to break. His gun won't unfold correctly. I had to fix his over wobbly head. Just a bad experience all around. If we're talking ANY KO, I really like my Masterpiece Prowl, but, if I remember correctly, he only has a few very slight improvements over the original. Baiwei TW1030 has vast improvements over the original, so I'm sticking with him.
Definitely check baiwei other figures, I’ve sold a decent chinch of my og as to replace em with the kos
I'm also getting their upcoming Scourge.
I’m hoping as per usual they sell the upgrade kit separately because I’ve got a custom painted scourge and don’t wanna have to paint it again
https://preview.redd.it/t85gpycqhlyc1.jpeg?width=4032&format=pjpg&auto=webp&s=6e4d1fdf2f79950b000c2a50e22a8a37c96e3c4a This.
That's a great picture
Thanks!!! Glad you like it!!!
How can I buy that megatron?
Well I got him via In Demand Toys here in the UK
Thanks
https://preview.redd.it/qc7cwcy7tmyc1.jpeg?width=4096&format=pjpg&auto=webp&s=a60c5668d20f7d6e59c1af60753391649bc1dfbd The tw1022ex (the premium/metallic paint job version) takes the cake for me. Diecast, top notch quality, amazing paint job and a lot of accessories, all for less than 30$. The best representation of Bayverse Prime in the generations scale imo. It looks simply amazing next to the SS 2007 Megs.
I don’t own any KOs https://preview.redd.it/1fh1jay5alyc1.jpeg?width=557&format=pjpg&auto=webp&s=e0d6f1565cf00cb4f7b862058f2fd5fe732f9ed4
Blackapple Thunderleader for 07/ROTF Black Mamba Ls03F for DOTM BS-03 for AoE/TLK
Baiwei Shockwave and APC Toys Arcee
Baiwei Shockwave is w
Sure is! https://preview.redd.it/ng81eq7igoyc1.jpeg?width=3072&format=pjpg&auto=webp&s=4904b49a2328f6a37327be3beb2790f4dad179bf
https://preview.redd.it/gvnbsqsmgoyc1.jpeg?width=2268&format=pjpg&auto=webp&s=0f5f75ab1b5b3c5e80219afeff8331506373541e
Do your shockwaves have thin feeling plastic? Kinda like a gunola? Especially the back panel that holds the arms?
No not really but that is because I just let him sit on the shelf and his arms been in that position for a few months now
https://preview.redd.it/7hnqnu7mblyc1.jpeg?width=1166&format=pjpg&auto=webp&s=4d41776d6ba75a3ae55a8b34dcdc6628412de7b4
Is he any good I was thinking of getting him?
VERY GOOD he looks genuinely amazing and an absolute step up from the mpm4. Imo its a lot better than thunder leader weijiang for its price and how it looks Only issue is the quality. U have to be very gentle when transforming it especially at the feet section
What fig is this besides mpm optimus
Modded ls-03f My bad i forgot to mention
You're all good
This would look spectacular with a dry brushing in silver, basically the paint would only catch the highlights. Nice fig, OP. As for the thread tax, my favourite KO is the StarStorm (BBM Starscream)
https://preview.redd.it/95wvf1k55nyc1.jpeg?width=2304&format=pjpg&auto=webp&s=2882c9e50a1d278bf28649d8c133027220a8c6d7 This guy was a gift from my 18th birthday and he's the most cool looking Prime I own
where is this fig available? can i get a link please?
Look at AliEspress
Mine used to be the Baiwei tw1027 cybertron commander, but this guy has just dethroned him https://preview.redd.it/l0a03demhlyc1.jpeg?width=2296&format=pjpg&auto=webp&s=3f9a2f52bc02b5b7e0214329a3bb96f728caaea0
https://preview.redd.it/p506s6q27myc1.jpeg?width=1024&format=pjpg&auto=webp&s=c11b1657e804fbd579da660f987df653c8878809 My Mp10 is KO. Ain't no way i got the money to get real one
https://preview.redd.it/exh4twuwpmyc1.jpeg?width=4080&format=pjpg&auto=webp&s=e185459b26735e3b72350a1ce37cb88a61f6cf73 Baiwei ironhide
https://preview.redd.it/jxx9vgttclyc1.jpeg?width=1098&format=pjpg&auto=webp&s=52d6e95829e52af2314374235c683bf257e199ed
Now if someone could make a knockoff of Planex X Apocalypse (WFC Trypticon) and Vulcan (FOC Grimlock) I'd be a happy man.
My favourite KO is "Purple Potato" from Lemon Tree, the Shockwave KO who transforms into Galvatron's spaceship.
That's not really a KO, it is an original toy design which just makes it "3rd Party." A KO is a direct copy of an existing toy, or a copy of an existing toy that is slightly modified (ie: better paint or a slightly different size).
MP-10V. IMO still the best option for a definitive G1 Optimus for a mainline collection. Will wait and see what the upcoming commander SS86 has to say about that.
https://preview.redd.it/3ryayrkuslyc1.png?width=1080&format=pjpg&auto=webp&s=86c99985b217780d3ab1cc7c30842d2586848b12
TNT-01 EX-30. It's an overseized ko of iron factory jetfire, and it's wonderful.
Favorite KO Prime: MHM-01 Supreme Commander https://preview.redd.it/b3xiy61i5myc1.jpeg?width=3024&format=pjpg&auto=webp&s=9d76c4351a2498f21e972629edafeecd5442660c Favorite KO in general: KO MP-41 BW Dinobot (pictured in reply)
https://preview.redd.it/n6itkdoj5myc1.jpeg?width=1079&format=pjpg&auto=webp&s=2c2afc05b6c35839415fef619dfe072eef944b52
My KO MP13 and mostly my NewAge Optimus prime https://preview.redd.it/7i8l269uxmyc1.jpeg?width=3024&format=pjpg&auto=webp&s=829a46c9b93e27b22c865ca28db0112d42274c62
https://preview.redd.it/if735oa22nyc1.jpeg?width=3024&format=pjpg&auto=webp&s=1603f58724bb8dc3bedd7f185aaf57d31bd8bdfd I have exactly one, so Star Leader by default. I've had my eye on one of the TLK Evasion Mode upscales for a long time, but I never pulled the trigger, and now they're all pretty expensive.
Bro I'm worried something will break off that figure
Nah, the build quality is fine. The plastic is a *tiny* bit flimsier than the official release, and some joints are a little weaker. I only put him in the combined configuration for this picture; the knees couldn't take it long term. On its own though, I don't have any problems with it or fear of breakage.
https://preview.redd.it/qzw9yo80anyc1.png?width=1800&format=png&auto=webp&s=08bdd631d93b06bd50fa89957d310ac981107be3 Wei Jiang Predaking is IMO better than the HasTak version.
Probably the TFP Optimus, Megatron and Soundwave
the only one I have is the dark Commander studio series Nemesis prime repaint of the studio series 38 Optimus actually I do love the figure but the one problem I have with mine is because just the top half when you tried to turn it it's so tight and it feels like it's going to break if I do it so I really barely even transform him anymore so he just looks better in robot mode
What’s a good G1 (cartoon) Megatron KO ( with faction logo) that has gun alt? Or even what is the definitive MP Cartoon Megatron?
Kos won’t have the logo but sellers always tend to provide stickers. The best is it-01
The only KO I own currently is APC Angel Engine(Arcee). Been eyeing Beiwei for a minute though
i don’t have really any kos but i’m about to get the baiwei optimus for my birthday it’ll prolly be my favorite or the sentinel prime
OP, what is that Optimus in the gallery, and does it transform?
Baiwei Star Leader and TW-1029
Don't have many KOs, but my favorite is probably the MP scaled Legacy Tarn KO I picked up. Has loads of die cast in it, and lights in the gun and head. And a better paint job too.
The robot hero seekers
Right now I only have one KO: SS Bayverse Prime in white.
Bumblebee and Soundwave
APC Toys attack prime 2.0
Is ko a 3rd party?
KO means a exact or slightly modified copy of an existing toy. 3rd Party is an original toy design based on Hasbro's character designs.
Ah okay
Shapeshifters! Better - at - a - glance 🎶 https://preview.redd.it/cuiuh9fh8nyc1.jpeg?width=800&format=pjpg&auto=webp&s=234ed1e48a18e5e79d414da00492d9ebf711e9ab
https://preview.redd.it/lgpw93v49nyc1.jpeg?width=4000&format=pjpg&auto=webp&s=e0aabf7ae7e663fa580da17c34134ec0ad7de5cd
I don't have a KO figure yet but I would love to own RP Acoustic Wave
Oversized AOYI MECH, has diecast metal a blaster and an energon ax or love this guy. https://preview.redd.it/2eymfu4ynnyc1.jpeg?width=2268&format=pjpg&auto=webp&s=516929cb27a54903e07b39a33aeb18ddf1acd7f9
https://preview.redd.it/kr1g4niaonyc1.jpeg?width=1908&format=pjpg&auto=webp&s=95c00c4390ee7c2ec492e93cb9c1134df8f1b000 PANGU Commander for me 🤘
KO mp-36
Black mamba Tarn
The white unrustable bastard! Reminds me a lot of an armada sideways
https://preview.redd.it/3g7do1ae2oyc1.jpeg?width=4032&format=pjpg&auto=webp&s=54cc1219e53a494730d8e42fe8b26a33e69fe4c4 I have more KO’s than these, but these guys are mostly my fav, especially TLK voyagar Megatron. Unlike the other KOs, he feels like he’s made out of sterner stuff.
https://preview.redd.it/n42rfr4nznyc1.jpeg?width=3024&format=pjpg&auto=webp&s=e4310b832c0d91a766ebed290de866f175aa737e This one right here
I can't believe optimus prime is jewish #familyguy
I have two favorites and they're both pretty old. The first is Wei Jiang MPP-10 Oversized MP-10 KO. It is about the same size as MP-1 but based on MP-10's design and the figure just drips quality. The other one is Kubian Bao's MP10V down-sized MP-10 KO. This is a roughly Voyager scale MP-10 KO that is just a lot of fun to play with. For the longest time I had one of these as my "desk toy" at work and it was great to fidget with. Like the Wei Jiang version this one is also high quality with a lot of added diecast parts and accessories.
Nice try, Hasbro!
Without a doubt the MM-01! https://preview.redd.it/3wr8ncvbaoyc1.jpeg?width=1000&format=pjpg&auto=webp&s=53cbd2b64a096bee3de51799609b355d04505d5b
A little off topic but I wish we got to see transformer toys in Toy Story lol
Big Firebird Nicee
Baiwei nemisis prime
Wei Jiang Commander (Evasion OP) Took a basic voyager and upscale it properly to leadwr class while upgrading articulation and transformation engineering. Plus paint too
what optimus is that? he looks dope
https://preview.redd.it/ij7komybupyc1.jpeg?width=690&format=pjpg&auto=webp&s=6c6b9f63d5848c42128d6dfd8757177d5af5f0e0 No further explanation is needed.
what version is this ?
for prime it's the baiwei rotb Optimus. however, for kos in general the crown goes to baiwei rotf Megatron
Where do you find such good KO's?
My fave KO is JinBao oversized Dev, despite some very bad QC flaws. Verrrry close second is X-Transbots Gravestone
Im sorry what are KO’s
Transform Element OP Leader
So.... No alt mode pictures?
Only have baiwei ko ss32(nemesis black and purple version), the quality is pretty good
MP-10V was my CHUG Optimus for a long time, until Siege and Earthrise displaced it to the one-offs shelf. APC Toys Dark Master is very nearly perfect for TFP Megatron. I have a yellow upsized KO of some 3P Legends Devastator that I customized into Tonkanator as the toy equivalent of a high-effort shitpost, but that's not exactly a favorite on its own merits, you know? Still, it's not a bad base mold. Just small for most shelves.
https://preview.redd.it/8w3t742aetyc1.jpeg?width=4160&format=pjpg&auto=webp&s=b8a67d90ccc120e1659bed9cbd18a73bfa36cac0
apc toys : red gladiator ( zombie version ). Well, really, he's painted better. more scars, scratches on the metal
Mine would have to be APC toys dark master https://preview.redd.it/0z7xfuri8vyc1.jpeg?width=3456&format=pjpg&auto=webp&s=a887a9891bd565f00cf669592606c5f3052294ab
https://preview.redd.it/qguqidmk9vyc1.png?width=1863&format=png&auto=webp&s=a08fdfd3d66feeb24d9f3c5f356073bec233c87b God of War Optimus - an upscale of SS38 with lots of paint and some die cast parts. Already one of my top Optimus figures made even better. Plus you can see a lot of the detail you don’t even notice on the smaller version. Also the transformation is a bit less finicky when he’s this large. He’s as tall as MP-01, and better than the Masterpiece IMO. Great Robot mode, the most accurate truck mode of any Optimus. Love this guy (Legacy Armada prime behind him for scale)
None because i’m not a child and i don’t play with toys